Building an AMC and Spares Business on the Boilers You Have Sold
How boiler makers turn their installed base into steady AMC, spares and service income: the register, the offer at warranty end, visits and the nameplate QR.
4 min read
By the Yantra Boilers team

Key takeaways
- Every boiler you have sold needs inspections, spares and maintenance for its whole life: that work goes to whoever the plant calls first.
- Start with a register: serial number, plant, contact, certificate date, warranty and AMC for every boiler.
- Offer the AMC before the warranty ends, with a visit plan the plant can see and a response promise you can keep.
- Put your name and a QR code on the nameplate, so the night shift calls you and not whoever they find.
A boiler maker’s order book goes up and down with the economy. The boilers already running do not: they need inspections, gaskets, tubes, pumps, valves, refractory and readiness for their statutory inspection every year, whatever the market is doing. Makers who look after that work have a steadier business. Most do not, because the boilers they sold ten years ago are a list in an old register.
Start with a register
You cannot serve plants you cannot name. Record, for every boiler you have supplied: its serial number and model, capacity, pressure and fuel, the plant and a contact there, the registration number, the date the certificate runs to, the warranty end, and any AMC. Start with boilers under warranty and the largest plants, then work back.
Offer the AMC at the right moment
The best time to offer an annual maintenance contract is in the last weeks of the warranty, while the plant still remembers your commissioning engineer and before a local contractor steps in. Make the offer concrete:
- Visits: how many a year, and what each covers: mountings and fittings, safety valves, water level controls, burner or grate, tube cleaning, blow-down practice, water quality review.
- Response: how quickly you attend a breakdown, and what that costs inside and outside the contract.
- Inspection readiness: preparing the boiler and the papers for its statutory inspection.
- Spares: which are included, and the discount on the rest.
- Operator training: a refresher on each visit, since operators change.
Price it on the work
Price an AMC on the visits, the travel, the boiler’s size and condition, and what is included, not on a percentage you heard elsewhere. Then add it up across your base. As an illustration with made-up numbers: 120 boilers still running, an AMC at ₹60,000 a year, taken by 30% of plants, is 36 contracts and ₹21.6 lakh a year before spares and breakdown work. Your own numbers will differ; the point is that they add up.
Keep the visits on schedule
An AMC that misses its visits is not renewed. Spread the visits evenly over the contract year, schedule each before it falls due, and record what was done. A short visit report, with readings and advice to the operator, is what the plant head remembers at renewal time.
Make the plant call you first
When a boiler trips at 2 a.m., the operator calls whoever they can find. A sticker on the boiler with your name, phone and a QR code changes that. The QR opens the boiler’s own page: its serial number, its certificate and AMC dates, its last service, and a form to report a breakdown or order spares.
Spares
Spares are where a plant most often goes elsewhere, usually to a local trader with a part that nearly fits. Keep the fast-moving parts for your common models in stock, quote spares quickly, and make ordering from the nameplate easy.
Stay in touch
A short email a few times a year to the plants in your base, about a new service, a common fault and its fix, or an AMC offer, keeps your name in front of them between visits.
What a good visit report contains
- The boiler's serial number, the date, and who visited.
- Readings: pressure, water level behaviour, flue gas temperature, feed water hardness where tested.
- What was checked and serviced: safety valves, water level controls, pumps, burner or grate, refractory.
- Faults found, what was fixed, and spares used or needed.
- Advice to the operator, and anything to watch before the next visit.
Keep every report on the boiler's record. At renewal time, a year of reports is the strongest argument for the contract, and for the next engineer it is the boiler's medical history.

Seeing what falls due
Once the register is in place, the work comes to you: certificates to renew, AMC visits to make, contracts ending and warranties running out, listed every morning.

Who does the work
An AMC business does not need a large team to start. One service engineer and a helper can cover a good number of contracts in a region, if visits are planned by route and the engineer carries the common spares for the models in that area. As the base grows, a second engineer, a service coordinator who books the visits, and a small spares store follow. Plan the territory so an urgent breakdown can be reached within the response time you promise, and do not sign contracts in places you cannot reach in time.
Keep the paperwork light: one record per boiler, one request per visit or breakdown, and a short report at the end. What matters is that every visit is booked before it falls due and every breakdown is answered the same day.
Frequently asked questions
- What does a boiler AMC usually include?
- Scheduled visits to inspect and service the boiler and its mountings, fittings, safety devices and controls, priority breakdown attendance, help preparing for the statutory inspection, operator refreshers and, depending on the contract, some spares.
- How many AMC visits a year are typical?
- Quarterly visits are common for boilers running continuously; lighter-duty boilers may need two a year. Agree the number with the plant based on running hours and fuel.
- When should I offer an AMC?
- In the last weeks of the warranty, while the plant remembers your commissioning team, and again whenever a breakdown shows the value of regular care.


